Description:
T-shaped chair, round tube, height groups №4-6
Dimensions: 391x441x740-820 mm, h = 380-460 mm. Weight: 4,57 kg.
Seat back size: 380x200 mm. Seat size: 380x350 mm.
The seat and the seat back are made of bent-glued plywood of 8-9 mm thickness and are covered with colorless varnish on a water basis. The seat and the seat back angles and front seat edges have a radius of rounding to prevent injury. The frame of the chair is made of a round tube 32х1,2 mm, 25x1,2 mm in diameter and 30х15 mm in size with application of powder paint. The seat back and the seat are fastened to the frame with the help of screws and nuts. Adjustment of height of a chair is carried out with the help of screws on the holes of the frame and the legs, between which there is a plastic transition sleeve. Plastic tips are fastened on the ends of the frame to prevent injury to students and damage to the floor. On the lower part of metal frame there is hole through which a marking of height groups can be seen while adjusting the height of the chair. Color marking in accordance to height groups is applied in the form of the circle of not less than 10 mm in size. Also the scale of marking of height groups is applied on metal frame with the help of laser engraving.
Dimensions: 391x441x740-820 mm, h = 380-460 mm. Weight: 4,57 kg.
Seat back size: 380x200 mm. Seat size: 380x350 mm.
The seat and the seat back are made of bent-glued plywood of 8-9 mm thickness and are covered with colorless varnish on a water basis. The seat and the seat back angles and front seat edges have a radius of rounding to prevent injury. The frame of the chair is made of a round tube 32х1,2 mm, 25x1,2 mm in diameter and 30х15 mm in size with application of powder paint. The seat back and the seat are fastened to the frame with the help of screws and nuts. Adjustment of height of a chair is carried out with the help of screws on the holes of the frame and the legs, between which there is a plastic transition sleeve. Plastic tips are fastened on the ends of the frame to prevent injury to students and damage to the floor. On the lower part of metal frame there is hole through which a marking of height groups can be seen while adjusting the height of the chair. Color marking in accordance to height groups is applied in the form of the circle of not less than 10 mm in size. Also the scale of marking of height groups is applied on metal frame with the help of laser engraving.
Frame color: green (RAL6018), grey (RAL7035), yellow (RAL1018), graphite moire (RAL7024).
Similar products
Glyanec